Ironed the dolls down with clothes!

 Alrighty- so I ironed them all down! Now I just need to embroider the faces.  If I were to do it all over again- these are the things I would do differently:

 This hair piece went behind the face, so it showed through the face, you can see a dramatic color change in the neck. So I think next time- I won't do any hair that goes behind the face, only OVER the face.

This one- I think it would have looked better to place the hair behind the dress- because the dress  shows through the hair piece. That bothers me.

But I'd say all in all, I am quite pleased. I have mixed emotions about the dresses. I just used scraps from my fabric pile, rather than going out and buying specific fabrics. Some of the outfits I love, but others I more so did just because that's what I had. I go back and forth with this idea. I like the idea of using up what i have, but is it really worth it, if you're not going to be in love with your creation in the end? And dont' get me wrong- I still love it, you get what I mean.

The other thing I wish I would have done was the skin color a little darker. I already wanted the skin color darker to begin with, but I couldn't find a peach color. There was only pink, off white or white. The store said they wouldnt' get peach in until the spring- can you believe that? But I checked everywhere. I didn't want to wait that long so I went ahead with the off-white. It's fine, but the arms want to disappear when you are far away. Up close you see the arms though.

Now I have to decide how I want to assemble the quilt, what fabrics I want to use, etc.

AND I have to decide if I'm going to sew around the applique. You are not supposed to sew on Ultra Hold HeatnBond, but I've heard that if you sew slowly you can do it. I'll keep you posted!

Overall I am very happy and excited about this project!

Part 3: Doll Dresses!

Now we are going to make the dresses! Just like I did with the bodies and hair, I first cut on paper to see  what i wanted for a dress. I decided I liked the first dress offered on the Paper Doll Dress Up cartridge the best. Also, after cutting it out the dress I discovered that the size 8, (the size of my paper doll body) was a little bigger than I wanted for my body. So I tried 7 3/4 and 7 1/2 and I decided I liked the 7 1/2 the best. It makes the dress a tiny bit shorter and a little bit smaller around the waste. I figured it any of my doll waist pokes out on the side I can trim the waist! (wouldn't that be nice to do in real life?) I did the black out feature so that there wouldn't be any unnecessary detailed lines on the surface of the fabric. After cutting it out on paper I measured a surface of 6x5 inches for the dress. So I cut out 6x5 pieces, and ironed on the HeatnBond just like I did with the other pieces.

 However, when I cut them out with the cricut, I discovered that my pieces were still too small.

 I should have done 6x6 pieces. My dress cut very close to the edge (which isn't a problem with paper), but with fabric, it sometimes cut off the bottom of the dress entirely, or gave me torn edges (since the fibers in the fabric can stretch, paper can't stretch!) Here is an example of a dress that was torn at the bottom, so i had to cut with my own sizzors the bottom to make it clean and smooth.

SO- for your project cut 6x6 pieces of fabric. I have found that even if the fabric is big enough for the object being cut, you want atleast a 1/2 inch extra on all edges because there needs to be a fair amount of fabric sticking to the mat so that it won't pull away from the mat. The cutting action wants to pull the fabric off the mat, and if there's not enough fabric holding it down, it will easily come up. So I would suggest to have atleast a half inch extra on all edges. For this project a 6x6 inch square will be plenty.

  

After you get your 8 dresses cut out you can finally start thinking about ironing them down. The only reason you wouldn't want to iron them down now is if you wanted to add shoes. I am still debating shoes, so I haven't ironed mien down. I need to sleep on it :) I am also going to do aprons on each dress.

I love it! I'm so excited to iron it all down. What do you think? Should I do shoes? I'm going to embroider the face, and cut and iron on an apron on each. What do you think for shoes?

Part 2: Doll Hair!

Before you do anything, DON'T IRON any pieces together YET! I will explain later.

 Now we are going to make doll hair. I chose 4 different colors: Dark brown, light brown, yellow and red.

 First I cut out my different hair styles with PAPER to see (like I did with the bodies) how much fabric I would need. I figured out each one ranged between 4-5 inches tall, so I cut out strips 5 inches wide.

 For my project I only need 2 of each color (8 total) so I cut each strip about 12 inches long. I did this to be safe, but after I cut them out I had 1-3 inches left over on each strip. SO if you don't want to waste fabric, then measure exactly how much fabric the hair will use. Otherwise 11 inches will be good enough.

 This is an example of how much the hair took up on the paper, giving me an example of how much fabric I would need. But as you can see each style of hair is a different size, so that's why I allowed extra, just in case.

 once I cut out my 5x12 inch pieces I ironed the HEATnBOND ULTRA HOLD to the backs just as the directions explain.

 take off the paper backing and put the rubber side facing down on the mat, just like you did with the bodies.

 pre-set 2 hair styles per color, and voila! You will have 8 of the cutest little haircuts you ever did see.

 THIS IS WHY I DON'T WANT YOU TO IRON THEM DOWN YET. As you can see- some of the hair goes behind the body, some of the hair will need to go over a dress. Once it's ironed down it's stuck! So- just cut out your pieces and resist the temptation to iron them down.

 I love the red color and style!

Don't you wish you had my camera? Sorry for the lousy pictures. Ok- next step- dresses!!!!!!

Part 1: Doll Quilt

This is a tutorial on how to make a doll quilt with your cricut:

Before you do anything, decide what size you want your dolls to be. I wanted mine to be as big as they could but still produce a good quantity. I discovered that on 24x12 mat, I could fit 4 dolls. First I cut 2 out on paper to see how far away they cut from each other and to see how far away the image started from the edge of the mat.

This way I could determine how much fabric I needed and how much could fit in the space I had. After doing this, I figured out I could fit 4 dolls that were 8 inches tall on the 24x12 mat on a piece of fabric that was 24 x 8 1/2 inches. If you don't have a 24x12 mat, you can do 2 on a 12x12 mat.

 I took my skin colored fabric, ironed it, and then ironed on the HeatnBond ULTRA HOLD. Follow the directions on the label.

After I ironed my fabric onto the ULTRA HOLD HeatnBond, I cut out the fabric to the sizes I needed. 24 x 8 1/2 inches in size. If you get a piece of fabric that is 45 wide you only need to buy 19 inches. (19 so you can have 2 extra inches for shrinkage, you will want your final product to be 17 inches long.

 After cutting my pieces I was left with (2) 24 x 8 1/2 fabric pieces.

Then I removed the paper and placed the rubber side of the fabric face down on the mat. Press firmly. I used I brand-new mat for this project as well as a new deep cut blade. These are the settings I used:

Blade: 4
Speed: low/ minimum
Pressure: max
size: 8 inches
(if you have an expression- quantity 4)

I also used the blackout feature so that the eyes and mouth wouldn't be cut out as I plan on embroidering them on.

 Then I peeled off each doll. This is the exciting part!

 This is what you should see on your mat when you're done peeling them off.

 After doing the whole process twice- you will have 8 cut out dolls!!! YAY!

Stay tuned for the next tutorial!